|
Valve>pillow block bearing
China VPH Machine Co., Ltd. is a specialized company devoted into manufacture and sales of pillow block bearings. We have a modernized staffs of tech research and pillow block bearing development, ISO9001 certificated, and manufacturing adopts advanced domestic and foreign standards such as GB, API, JIS, DIN, BS, NF and ANSI. We enhance the mettle of 'expoition and innovation, better and better' and promise of 'quality first, customers first'. As a pillow block bearings manufacturers, wholesalers, exporters, stores, suppliers and shops, tech research, sales and service combined company, we honestly provide you service of review, custom, miniature, large, used, accessory, discount, cheap, replace pillow block bearings.
|
|
Worksman Pillow Block Bearing
Each, 58/58A
Shipping Weight: 3.00 pounds
Pillow block bearings are a form of mounted bearing used to provide load support for a rotating shaft axis. The bearing housing mounts to a surface parallel to the shaft axis. Selection of the appropriate bearings can be accomplished based on the shaft size and the radial and thrust load requirements. Pillow block bearings are designed to support a shaft: the mounting surface is on a parallel line with the axis of the shaft. Elongated bolt holes in the base or feet of the unit allow for some adjustment and easy mounting of the pillow block bearing.
Certain dimensions and measurements of pillow block bearings are critical to selecting the right pillow block-whether original to the equipment or as a replacement. The shaft diameter is matched with the appropriate corresponding bore dimensions of the bearing unit. If a properly sized unit matching the shaft is selected, the bearing will easily slide onto the shaft and into position, ready to be secured by the locking device. Shaft height also known as backing height is determined by measuring the distance from the base (or bottom) of the pillow block to the center of the inner ring or shaft. Lastly, the distance between the bolt hole centers is taken from the center of one elongated bolt hole to the center of the housing’s other bolt hole.
Housing material for a pillow block bearing is typically made of cast iron or pressed steel. Most pillow block bearings are self-lubricating.
|
|
THOMSON SS6UPB8 Super Smart Ball Bushing Bearing Pillow Block
Shipping Weight: 3.20 ounces
A pillow block is a block that encloses and supports a journal or shaft; a bearing. The block is used for transfering energy at 90 degrees and supports a "transfer shaft" with the use of bearings. The shaft is secured via an "off center" ring, that tightens itself onto the main bearing manifold.
Pillow block bearings are a mounted bearing used to provide support for a rotating shaft with the mounting surface on a parallel line with. Housing material for a pillow block bearing is typically made of cast iron or pressed steel.
A split housing pillow block bearing assembly for use with a roll having a shaft. A bearing assembly including a bearing housing split along a parting line passing through the axis of the shaft into an upper housing and a lower housing, the lower housing having a foot portion extending therefrom, the foot portion being offset towards the roll whereby a portion of the bearing housing projects axially outward from the foot portion away from the roll, the lower housing and the upper housing each having an arcuate bearing receiving aperture; a spherical roller bearing positioned within the arcuate bearing receiving apertures, the spherical roller bearing having a inner bore extending therethrough, the inner bore being tapered; and a tapered sleeve mounted on the shaft, the tapered sleeve being received within the bearing inner bore, the foot portion of the bearing being attached to the frame.
|
|
